Low Cost Hand Held Ultrasonic Flow Meter

WDI-100/200P Portable Ultrasonic Flow Meter with Data Logging and various Output options

A non-intrusive Flow meter and volume flow display which facilitates quick and simple installation without the need to cut into existing pipe-work. Location memory allows quick set-up when returning to previous sites.

Supplied Clamp-on Ultrasonic Transducers suitable for pipe sizes from 25mm - 6000mm are the following:

Sensortype A:
Pipe size: DN15 to DN100
Temperature: Von 0C to 100C
Mounting: Guide rail, magnetic for steel 

Sensortype B:
Pipe size: DN15 to DN100
Temperature: 0C to 160C
Befestigung: Clamp-On Verfahren

Sensortype C:
Pipe size: DN50 to DN700
Temperature: 0C to 100C
Mounting: Guide rail, magnetic for steel

Sensortype D:
Pipe size: DN50 to DN700
Temperature: 0C to 100C
Mounting: Clamp-On

Sensortype E:
Pipe Size: DN50 to DN700
Temperatuer: 0C to 160C
Mounting: Clamp-On

Sensortype F:
Pipe size: DN300 to DN6000
Temperature: 0C to 100C
Mounting: Clamp-On

Power: Internal Battery Pack (12 Hours), VAC Power Supply,
Outputs: RS232, 4-20mA, Pulse/Alarm Output (configurable)
Ingress Protection: Display=IP65, Transducer=IP65

Accuracy: 1-2% of reading above 0.2 m/sec on condition that the menu point M45 (c-factor) will be configured

Repeatability: 0.2% fixed installation

Pipe size: 15 - 6000mm, depending on sensor

Pipe material: All metals, most plastics, fiber glass, good lined pipes, etc.

Liquid types: Water, sea water, chemical liquids, oil, alcohol, beer, etc.

Response Time : 0-999 (User configurable)

Data-logging: The totaliser data from the last 64 days, 64 months or 5 years (User configurable)

Dedicated shielded transducer cable: Standard length 5 metre, can be extended to 10 or 15 metre

Weigth: 538 gr.