Das Ultraflow 2000 können Sie bei uns mieten. Für den Mietzeitraum wird Ihnen ein Komplettgerät und das notwendige Zubehör zur Verfügung gestellt.
Der Mietpreis beträgt pro Woche EUR 250,00
zuzüglich der gesetzlichen Mehrwertsteuer.
- User friendly - wall mounted version
- Low cost and clamp-on
- Works on any type of pipe with a diameter of 50mm to 5000mm
- An optional version can be used to measure heat or energy
Transducer sets |
|
Pipe size |
A sensors |
|
50mm to 89mm |
B sensors |
|
50mm to 1000mm |
C sensors |
|
300mm to 2000mm |
D sensors |
|
1000mm to 5000mm |
Temperature range: A, B & C: -20oC to +125oC
Temperature range: D: -20oC to +70oC
Display: Volumetric flow units: m3, gallons, litres
Velocity units: metres/second, feet/second
Signal output: 4-20mA into 750ohms, opto isolated
Pulse: Max 1 pulse per second
Heatmeter options: kW, kCal / hours, minutes, seconds
Analogue output: 2 off 0-16, 0-20 or 4-20mA
Opto isolated with user definable scaling
Temperature sensors: Maximum temperature difference: 145oC
Power: 110V, 240V or 24Vdc
Wenn Sie weitere Informationen zu diesem Produkt benötigen, teilen Sie uns dies bitte einfach per Mail an: info(at)messcontrol.de mit.
The Ultraflo 2000 is a “Transit Time” ultrasonic flowmeter designed to work with clamp-on transducers, enabling accurate measurement of liquid flowing within a closed pipe, without the need for any mechanical parts to be inserted through the pipe wall and into the flow system. The Ultraflo 2000 is therefore simple to install requiring no shut downtime, with the added advantage of no pressure drop or contact with the process liquid.
The Ultraflo 2000 has been designed for permanent metering on a pipe range of 13mm up to 5000mm and is supplied with transducers and mounting hardware to suit the application.
The Ultraflo displays volumetric flow rate in a wide range of units, linear flow rate in metres and feet per second with total volume flow displayed up to a maximum of 12 digits.
Additional facilities offered by the Ultraflo are a 4-20 mA flow proportional output, Pulse output or Set point, Negative flow indication and Display/Output variable damping, helping the Ultraflo cope with poor and unstable flow conditions. All outputs are configured to interface with different types of data collection systems including Building Management Systems.
The instrument is able to work on a wide variety of pipe sizes from 13mm up to 5000mm, simply by selecting the correct transducers and attaching them to the outside of the pipewall using the mounting hardware provided.
The setup operation is easily accomplished on the push button keypad with the user only requiring to know the pipe dimensions and the type of pipe wall material. All other application parameters can be measured by the instrument itself.